MRF16CH 16CH S-BUS / 8CH CPPM / PWM D16 Telemetry RC TX Receiver for FPV Racing Drone
Item Name:
MRF16CH
Weight:
3.8g
Voltage:
4.8-8.4V
Retail Price:
US$13.99/PC
Application:
FPV Racing Frames, Mini Size Aircraft etc.

Specification

Item Name: MRF16CH

Operating Voltage: 4.8V~8.4V

Dimension: 26x19.2x5mm (exclude antenna)

Weight: 3.8g 

Antenna: Dual-antenna

Communication Data: Bidirection Communication

Output Channels: S-BUS (16CH) + CPPMR (8CH) + RSSI (PWM)


Compatibility

Compatible OPEN TX FRSKY D16 remote control system

Suitable for FRSKY X9D, X9DP, X9E, X12S etc. D16 supported remote control

16CH

Feature

1) High quality PA to ensure high receiving sensitivity;

2) Dual-antenna design, available to mount in different angle to increase the reception reliability;

3) Dual serial signal S-BUS/PPM (8CH) output, connect directly to flight control system, especially for mini multirotor and aircraft to save mounting space;

4) RSSI(PWM) output, available to detect the signal changes of the radio control via receiver.


Bind Procedure

1. Turn on transmitter, select MENU and enter MODEL SETUP, select D16 mode and start BIND function;

2. Press and hold the SW on the receiver and power on, the GREEN LED on and RED change to flash means bind completely.

3. Transmitter exit BIND function, power-on again the receiver, GREEN LED on means BING successfully;

4. If failed binding, please repeat above steps.


LED Status

16CH-LED

MRF16CH-6